Clothes Washers Aka Washing Machine

How many times have you done the laundry and cried because you didn't have a clothes washer at home? A clothes washer can change your life. No more bruised hands and wrinkled fingers. Sure, clothes washers are expensive, but their many features are definitely well worth the long line of zeros on the price tag.

A clothes washer (also known as a washing machine or simply a washer) is a device used to wash and clean laundry, such as towels, clothing, and sheets. It uses a spinning motion to deep clean linens soaked in a mixture of water and cleaning detergent, as opposed to scrubbing the fabric like in hand washing. A clothes washer is actually safer to use on clothes. As long as you follow the correct water temperature and the right amount of detergent in the wash, the clothes will make it out of the washer just fine.

This machine can be either be a household or commercial appliance. Household clothes washers are smaller for space convenience and are less sturdy, but they still function well despite their cheaper price tags. In Europe and the Middle East , the front loading design is more popular, though the top loading design is much preferred throughout the rest of the world. Critics say the front loading design is the better of the two models. You might want to keep that in mind when buying a clothes washer.

Washing Machine Buying Tips:

* Look for an energy efficient or high-efficiency model (Electricity is NOT a renewable resource)

* Think about water usage (in general front loading clothes washers use less water then top loading)

* The number of different washing options isn't so much as important as the cycles that you will actually use so look for one that has the washing options that you are going to use the majority of the time

* Think about the amount of space that the washing machine is going to take up as front loading designs typically take up more space then top loading ones

* Compare manufacturer warranties as a washing machine is considered a major appliance and therefore preventing costly repair bills in the future can be prevented with a solid warranty

* The number of loads you or your family does in a week will help you determine how big of a clothes washer you need. A family of 6 with small kids is probably going to do a lot more then a family of 4 with grownups.

Most commercial clothes washers have sturdier and more compact models. These machines are usually fitted with a stainless steel body kit to protect it from corrosion and rust in a constantly moist environment, and many feature front loading designs. If you haven't seen a commercial clothes washer, you can find one at the nearest laundromat center in your area.

Nylon Shoulder Washer, 0.163" ID, 0.229" OD, 0.046" Thick, 0.312" Shoulder Diameter, 0.050" Length (Pack of 100)

Nylon Shoulder Washer, 0.163" ID, 0.229" OD, 0.046" Thick, 0.312" Shoulder Diameter, 0.050" Length (Pack of 100) Review

Nylon Shoulder Washer, 0.163" ID, 0.229" OD, 0.046" Thick, 0.312" Shoulder Diameter, 0.050" Length (Pack of 100) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Nylon Shoulder Washer, 0.163" ID, 0.229" OD, 0.046" Thick, 0.312" Shoulder Diameter, 0.050" Length (Pack of 100) Overview

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 30, 2010 10:55:15

Pressure Washer vs Power Washer

You have probably already learned that "power" is synonymous with "pressure" when searching for information about high-pressure cleaning equipment and services. What you may not know is that one of these terms is more commonly used than the other. This can be relevant to businesses for their online marketing campaigns and to consumers in their search for information.

On average, in the United States, the term "pressure washer" is approximately three times more likely to be searched for on the internet than "power washer". So, if your business is only using the term "power" on its website, blog, online store, and pay-per-click program, it is likely missing out on 75% of searchers and potential buyers. Companies wanting to reach the majority of these people with a minimum amount of work should market their cleaning equipment and services using the term "pressure". Ideally though, the optimal marketing campaign would target both terms to ensure the organization is reaching all consumers searching for pressure (or power) related cleaning services and supplies.

While this is true of the national average, companies should also research and consider the regional differences in how people search in each market. In several Southeastern states, for instance, people use the term "pressure washer" almost exclusively, with only about 1 in 10 searchers looking for a "power washer". Conversely, in some Midwestern and Northern states, the ratio of "pressure" to "power" is almost even, with roughly 6 of 10 searchers seeking "pressure washing" as opposed to 4 of 10 looking for "power washing". In places like Phoenix, Arizona where there is a melting pot of people from all over the nation, the ratios are more consistent with the national averages of one search for "power washers" to every 3 searches for "pressure washers".

Pentair Pacfab 2" HI-Flow Valve Washer 272402

Pentair Pacfab 2" HI-Flow Valve Washer 272402 Review

Pentair Pacfab 2" HI-Flow Valve Washer 272402 Feature

• WASHER PLASTIC
• Pentair PacFab 2" HI-Flow Valve

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 27, 2010 06:28:19

Beneath the Bonnet

Haven't looked underneath the bonnet of your car for quite some time? Just like our own need for water, a car needs oil, various fluids and regular maintenance. Read our beneath the bonnet guide, grab the following items from your local motor factors and get working!

What you'll need to do:

1) Oil Check

2) Engine oil check

3) Engine Coolant check

4) Power Steering Fluid check

5) Brake Fluid check

6) Window Washer Fluid check

1) Oil Check; In order to check the engine oil you are going to have to use the dipstick. The dipstick is normally located to the front of the engine on all cars. It is used to check the level of engine oil. Always make sure to park your car on level ground when doing this. How you check the level of oil, is by removing the dipstick. You should then wipe the metal end of it with some tissue. Place the dipstick back into its holder, and pull it back out again. Observe the end of the dipstick. There should be a line indicating the level that oil should be at. If it is below the line obviously, you have to top up oil, and should do so immediately. If it is above the line, you can resume driving and will not need to top-up.

2) Engine oil is a fantastic substance. It keeps your car's engine running smoothly, oiling the interior components and ensuring that it does not seize. Believe it or not, a UCPG survey has shown that one in three cars on Irish roads is low on oil. You should make sure to check the level of oil in your car every month. After you have checked it (see oil check), you might need to top it up. How you do this is by removing the engine-oil cap. We would recommend that each time you top up the oil, try and use the same brand name and make every time. Add a little oil into the engine and then wait one minute for it to settle inside. Re-check your dipstick, and add accordingly if it is not at the correct level, and requires more. When the level is correct, screw the cap back on and make sure you have slotted the dipstick back in place. You should not have to replace oil frequently. If you do, the engine could be leaking.

3) Radiator coolant is a mixture of water and coolant that is pumped around the engine and cools it with the help of the radiator. To check the coolant level you will have to find the reservoir where the water/coolant mixture is stored and dropped in. When you find the reservoir, next you will have to see if it is at the correct level. On the outside of the reservoir there will be wither a line or two lines indicating what level the coolant should be at. If there is only one line, the level should be at the line. If there are two lines the level of liquid coolant mixture should be between the lines. If it is even slightly below the lines we suggest you top it up straight away. You will obviously have to purchase some coolant first. You will have to mix it with water, at a ratio of 50% water, 50% coolant. Remove the reservoir cap and add the mix accordingly.

4) Power steering fluid Before checking your power steering fluid, you should run the car first for a few minutes to warm up the engine. Make sure as always that it is parked on level ground to gain an accurate reading. Turn the engine off. Again open up your bonnet and find where the power steering fluid reservoir is located. Remove the reservoir cap, which will usually have a small dipstick attached to it. Using the dipstick check the level of fluid. The level should be within the range indicated on your stick. Top up the fluid using whatever type is recommended in your cars owner's manual.

5) Brake Fluid; In similar fashion to the radiator coolant reservoir, there is a brake fluid reservoir and it has a marker to show how much fluid should be in the braking system. To check the brake fluid level, refer to this marker and top up accordingly. On the reservoir cap, a marking will read out either DOT 3 or DOT 4. What is written on the cap is the type of brake fluid you will have to use. When buying the fluid, ask for the DOT that your car requires. Again, top up the fluid accordingly. Check around the brake disc area of the wheels for signs of leaking fluid after putting the fluid in.

6) Window washer fluid is something that we all should have changed at least once in our motoring lives. Window washer fluid, as suggested by its name is used to wash the windscreen and is a mixture of mainly water and washer fluid. The windscreen washer bottle should prove the easiest part to locate beneath the bonnet. It generally will have a marking similar to that in the picture.

Note: Location of the above discussed applications will differ with different car manufacturers and models. The above engine picture should help you to locate them.

The Right Kind of Pressure Washer

There's something fun about using a pressure washer. Its like having a high powered squirt gun except you use it to clean things with. Save money by washing your own car,boat, even your home but make sure you get the right tool for the job.

Pressure washers are rated in psi. or pounds per square inch and the biggest problem for people who go out and buy them is they don't get one with enough power. You can go to the department store and buy a 1000 to 1700 psi washer for around a hundred bucks and you won't have enough working pressure to wash your car with, which is what most people buy them for. By the same token you can get one that is so powerful that it will take the paint right off whatever it is you're cleaning, and most of the cheaper ones are not adjustable, so be sure you either get one at the pressure you need or find one that lets you dial in the pressure to suit the job. A minimum of 2800 psi is needed for washing most cars.

You can get a pressure washer in almost any configuration you want. There are gasoline driven pressure washers and electric motor driven ones. The more expensive ones even have oil or propane fired heaters that let you wash with hot water which is ideal for making an engine look brand new, and the top of the line ones can even put out steam.

Besides washing your car and saving money on all those coin operated car washes, you can blast off that dirty driveway, clean the outside of your house, make short work of clearing out your gutters, and cleaning patio furniture and around swimming pools is a breeze with a pressure washer. You can even start your own business by getting a pressure washer and mounting it on a utility trailer along with a generator and water tank.

Nylon Shoulder Washer, 0.156" ID, 0.250" OD, 0.062" Thick, 0.315" Shoulder Diameter, 0.187" Length (Pack of 50)

Nylon Shoulder Washer, 0.156" ID, 0.250" OD, 0.062" Thick, 0.315" Shoulder Diameter, 0.187" Length (Pack of 50) Review

Nylon Shoulder Washer, 0.156" ID, 0.250" OD, 0.062" Thick, 0.315" Shoulder Diameter, 0.187" Length (Pack of 50) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Nylon Shoulder Washer, 0.156" ID, 0.250" OD, 0.062" Thick, 0.315" Shoulder Diameter, 0.187" Length (Pack of 50) Overview

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 21, 2010 09:15:58

Oregon 37-051 Pressure Washer Quick Connect Coupling 3,650 PSI Max 7.8 GPM 300-Degree F Max 3/8-Inch Female Inlet & 22mm x 1.5 Female Outlet

Oregon 37-051 Pressure Washer Quick Connect Coupling 3,650 PSI Max 7.8 GPM 300-Degree F Max 3/8-Inch Female Inlet & 22mm x 1.5 Female Outlet Review

Oregon 37-051 Pressure Washer Quick Connect Coupling 3,650 PSI Max 7.8 GPM 300-Degree F Max 3/8-Inch Female Inlet & 22mm x 1.5 Female Outlet Feature

• 3650 Max PSI
• 7.8 GPM
• 300 Degree F Max Temp
• 3/8-Inch Female Inlet, 22mm X 1.5 Female outlet

Oregon 37-051 Pressure Washer Quick Connect Coupling 3,650 PSI Max 7.8 GPM 300-Degree F Max 3/8-Inch Female Inlet & 22mm x 1.5 Female Outlet Overview

Quick Coupling

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 18, 2010 23:07:08

Nylon Shoulder Washer, 0.253" ID, 0.371" OD, 0.031" Thick, 0.750" Shoulder Diameter, 0.046" Length (Pack of 50)

Nylon Shoulder Washer, 0.253" ID, 0.371" OD, 0.031" Thick, 0.750" Shoulder Diameter, 0.046" Length (Pack of 50) Review

Nylon Shoulder Washer, 0.253" ID, 0.371" OD, 0.031" Thick, 0.750" Shoulder Diameter, 0.046" Length (Pack of 50) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Nylon Shoulder Washer, 0.253" ID, 0.371" OD, 0.031" Thick, 0.750" Shoulder Diameter, 0.046" Length (Pack of 50) Overview

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 17, 2010 14:14:23

Nylon Shoulder Washer, 0.375" ID, 0.500" OD, 0.125" Thick, 1.000" Shoulder Diameter, 0.750" Length (Pack of 100)

Nylon Shoulder Washer, 0.375" ID, 0.500" OD, 0.125" Thick, 1.000" Shoulder Diameter, 0.750" Length (Pack of 100) Review

Nylon Shoulder Washer, 0.375" ID, 0.500" OD, 0.125" Thick, 1.000" Shoulder Diameter, 0.750" Length (Pack of 100) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Nylon Shoulder Washer, 0.375" ID, 0.500" OD, 0.125" Thick, 1.000" Shoulder Diameter, 0.750" Length (Pack of 100) Overview

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 16, 2010 07:44:04

Fix A Leaking Outside Water Faucet

Sometimes you run across a leaking spicket that is on the outside of the house. If you live in the city, this could increase your water bill not by much but still an increase. If you live out in the country this might increase the electric bill because the well keeps on running to provide that water.

Depending on the type of spicket that you have will depend on the fix. If you have a standard compression spicket, which usually has the round metal handle on it, the leak may be coming from the handle stem, if so all you have to do it tighten the packing nut that is buy the handle. To do this just take a wrench and tight the packing nut around the stem. Now if that doesn't fix it, and the handle is still leaking, or that the leak is coming from the spot, we are going to have to take the take the spicket apart.

To do this we want to start off by shutting off the water to the spicket. This is done usually in the basement or crawl space. Now if your house is on a concrete slab there is one of two things you can do. One is shut the water main off to the entire house, or if you are lucky and the plumbers installed a shut off for that spicket, which they most likely didn't do, you can turn that off. The same goes if you don't have a shut off in the basement for the spicket, you have to shut off the main to the house. Now the main to the house will have a large meter on it known as, you got it the water meter. There will be some sort of valve near it. Warning! DON'T SHUT THE VALVE OFF THAT GOES INTO THE METER. This will get you into a lot of trouble it tampered with. The valve that we want is on the out of the water meter.

With the water shut off, its time to get to work. Now go outside and turn and open the valve to release and water that is in the pipes from the inside valve to the spicket. If you had to shut the main off go every fixture in the house and open them to release the water and the go to the spicket and open it. This will remove any water from the house and then you don't have to work with water coming at you by surprise.

Now, if the stem is leaking we are going to want to remove that part from the spicket. To do that, we are going to need an adjustable wrench. Behind that packing nut there is a spot that you can place an adjustable wrench and unscrew the assembly. Completely unscrew that packing assembly and remove it from the spicket. Now we are going to want to get to the packing nut washer. To do this we need to unscrew the handle on the assembly. There should be a nut or screw on top of the handle that you can unscrew. Unscrew it and remove the handle.

Next you are going to want to unscrew and remove the packing nut. Inside the nut you are going to find some type of washer, either a Rubber packing washer or graphite packing string. Remove either and replace with a new matching one. Now if you can't find a matching washer for the packing nut, you can use graphite sting. Wrap the string around the stem and the push the packing washer over it and tighten it down. You can do this by using a flat blade screw driver. The reverse the steps, first by reinstalling the packing nut, put the handle on the assembly, put the assembly back in to the spicket, and tighten.

Now if the spicket was leaking from the spout, all beginning steps are the same to get the assembly out of the spicket. Then you are going to want to replace the compression washer that is on the bottom of the assembly. Unscrew the nut that holds it in place and replace the washer with it exact match size and shape. Re-screw the screw back on to the assembly to hold the washer. Then reinstall the assembly back into the spicket. With the spicket reinstalled it is safe to turn the water back on. Make sure that all the faucets in the house that you opened are closed first.

Malber WD1000 Front Load All-in-One Washer Review

The Model Malber WD1000 washing machine possesses the combination of dryer and washer. If you are looking to save space in your laundry room, this washing machine will be the ideal choice.

Malber WD1000 cost about $1,050 US dollars today. As an energy efficient washing machine, you will notice that your electric bill is kept to the minimum. One good thing about this washing machine is its compact design. It is 20 7/8 inches deep 33 ½ inches tall and 23 ½ inches wide in measures, ideal for small household.

This machine operates on a standard of 110-volt power. In this washing machine you do not have to take out your clothes as it has a dryer function as well. With just a simple press of the button, you can dry and wash your clothes without the hassle of transferring to another washer. This washing machine also features eight other separate rinse and wash cycles.

This particular washing machine also features the ventless drying system. It condenses cold water through the machine when it runs steaming. Water wastage is minimized. You do not need to place the machine near the window for ventilation purposes also.

This machine featured two separated drying cycles. One is for the normal clothes and the other one is for delicate clothes. The time range of this dryer is from ninety (90) to one hundred twenty (120) minutes timer. Therefore, compared to a gas unit dryer, it'll take a long time to dry your fabrics.

If you're planning to buy a combined dryer and washing machine with quality, you must take a closer look at this Malber WD1000. It uses a standard 110-volt power and there's no need to have any special wiring.

Liebherr Upright Freezer Review

The upright freezers from Liebherr are all energy- saving appliances and allow all the frozen food to be easily accommodated and make food storage convenient. The interiors of the freezers are variable and they feature easy-to-open doors. The energy you save by using one of these freezers as opposed to an older freezer will save a lot of money in the long run, which makes keeping stocks of fresh fruit, vegetables, meat and fish convenient and economical.

There are eight models to choose from in the current selection of Liebherr upright freezers and all but two of them have NoFrost technology. The NoFrost technology makes the Liebherr upright freezer range even more economic and keeps the freezer from icing up. It works by circulating dry air around the freezer cabinet using fans. Instead of the traditional cooling elements assembled within all the freezer liner, those of a NoFrost system are compact and separated from the main cabinet space, which means that they are able to be heated for short periods of time to stop any ice from forming. The two upright freezers that do not have NoFrost technology included are the G2413 Comfort and the 2713 Comfort models.

The Liebherr upright freezers are energy saving as they come with an energy efficiency rating of either A+ or A++. They are available in a selection of sizes and the height of the freezers ranges from 125cm to 184.1cm. Each of the upright models has the same width of 60cm apart from one model. The GNP 3376 Premium NoFrost model has a width of 66cm so make sure if you go for this model that you have made enough space available for it. The maximum capacity of the Liebherr upright freezers ranges from 151 litres to 305 litres, so there should be a model available for both single households, large family households and everything in between.

Liebherr's selection of domestic appliances in general is noted for its concept, modern design and well-planned solutions for optimum convenience to the consumer. Its domestic appliance range includes table-top, free-standing and combined refrigerators and freezers, freezer chests, food storage and drink- cooling refrigerators, wine cooling and wine-temperature control cabinets. But as well as domestic appliances, Liebherr also manufacture refrigerators and freezers for commercial use.

The Liebherr family business was established in 1949 by Hans Liebherr. Originally, the company did not focus on domestic kitchen appliances, but was more involved in the manufacturing of tower cranes and industrial machinery. But over the years the family business has grown into what is today a group of companies, who employ a workforce of around 26,000 in more than 100 companies all over the world. The Liebherr Group's holding company is Liebherr-International AG in Bulle, Switzerland and it is entirely owned by members of the Liebherr family. Over 45% of the Liebherr Group's workforce is based in Germany.

Domestic appliances from Liebherr are a symbol of quality in Europe and beyond. Every day more than 7,000 appliances leave Liebherr's various production plants. All Liebherr have a 2 years parts and labour warranty.

The Crazy Future of the Washing Machine

The washing machine. It's a pretty regular thing. White. Square. Not usually the type of object that anyone could get excited about. Until now, that is. It just so happens that the last few years have seen some crazy advances in the industry, and the future looks even more interesting. So what's up in the world of the washer?

LG Washer and Ironing Machine.

In 2006, Korean electrical giants LG announced the arrival of a washing machine that can iron as well as wash. By incorporating a unique hot steam system that starts after the rinse cycle, the creases that develop during washing are quickly eradicated, not only saving you time on ironing, but also meaning that your clothes will never shrink again. The machine is also available with a floral pattern to further stand out from the washer crowd.

Eco Egg

The Eco Egg, developed by the Chinese company Jiangmen Hanyu Electrical, is a curious thing. As the name suggests, this mini-washer is egg-shaped, pink and looks edible. The manufacturers are proud of its environmentally-friendly and its disinfecting function making it safer for cleaning baby clothes. It also means that instead of having to wait for a full load, one or two shirts can be washed whilst still being eco-friendly.

Whirlpool Mobile Phone Washing Machine

Another in a long line of 'smart' goods, Whirlpool have developed a washer that can be controlled by SMS. By using a home network, the machine alerts you if it has stopped by either sending a message to your mobile, TV or computer. The user can then either attend to the situation manually, or if he/she is not at home, they can send an order back to the machine, for instance a 'fluff' or dry cycle.

The Sfera - Spherical Washing Machine

In a revolutionary turn of washer design, the team at Electrolux have invented a completely new mini-washer. The Sfera is a wall mounted ball that entirely revolves. The few graphic representations that have been released show the machine attached to two walls in the corner of a bathroom of the future. But it remains to be seen that when the design comes to fruition, whether it will be able to carry the weight of wet clothes or will be able to be mounted on any kind of wall without breaking it when in use.

The Washup Washer/Toilet

The Washup is another future design. In simple terms it is a washing machine and toilet in one. The machine sits atop the cistern and once it has finished washing, uses the water from your dirty clothes to flush the toilet. The design is also space-saving and easier to use without any crouching or bending down involved.

Xeros

Finally, the University of Leeds has been testing a machine to be released in 2009. Amazingly, the full-size machine uses just a cupful of water in addition to plastic chips that absorb any dirt and are collected at the end of the cycle. Clothes are nearly dry as soon as the cycle is finished.

Nylon Retaining Washers 6, 21/64" OD x .198" ID x .062" Thick (Pack of 100)

Nylon Retaining Washers 6, 21/64" OD x .198" ID x .062" Thick (Pack of 100) Review

Nylon Retaining Washers 6, 21/64" OD x .198" ID x .062" Thick (Pack of 100) Overview

Similar to standard flat washers, but with a specially configured I.D. designed to grip the outside of the screw shank. The washer slides on the screw easily, but is retained on the screw. For use in applications requiring pre-assembly of the screw and washer, to reduce final assembly cost.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 07, 2010 18:42:09

Nylon Shoulder Washer, 0.144" ID, 0.234" OD, 0.046" Thick, 0.312" Shoulder Diameter, 0.062" Length (Pack of 50)

Nylon Shoulder Washer, 0.144" ID, 0.234" OD, 0.046" Thick, 0.312" Shoulder Diameter, 0.062" Length (Pack of 50) Review

Nylon Shoulder Washer, 0.144" ID, 0.234" OD, 0.046" Thick, 0.312" Shoulder Diameter, 0.062" Length (Pack of 50) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Nylon Shoulder Washer, 0.144" ID, 0.234" OD, 0.046" Thick, 0.312" Shoulder Diameter, 0.062" Length (Pack of 50) Overview

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 06, 2010 04:48:12

Nylon Shoulder Washer, 0.205" ID, 0.312" OD, 0.046" Thick, 0.620" Shoulder Diameter, 0.046" Length (Pack of 100)

Nylon Shoulder Washer, 0.205" ID, 0.312" OD, 0.046" Thick, 0.620" Shoulder Diameter, 0.046" Length (Pack of 100) Review

Nylon Shoulder Washer, 0.205" ID, 0.312" OD, 0.046" Thick, 0.620" Shoulder Diameter, 0.046" Length (Pack of 100) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Nylon Shoulder Washer, 0.205" ID, 0.312" OD, 0.046" Thick, 0.620" Shoulder Diameter, 0.046" Length (Pack of 100) Overview

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 03, 2010 00:19:04

10 Bolt Size, Stainless Steel Lock Washers (100 Per Package)

10 Bolt Size, Stainless Steel Lock Washers (100 Per Package) Review

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 01, 2010 17:53:13