Choosing The Best Paper Shredder

After a brief look at the variety of paper shredders available in the market today, one asks "Which is the best paper shredder?" The answer to this is similar to all "best" questions and is inherently unanswerable. The answer actually depends on your personal needs, requirements, purpose of use and your budget.

What should one consider before making an informed decision?

Firstly, you should carefully review your needs and decide the degree of shredding you need. All shredded documents can be put together with sufficient man-hours invested. The question that arises is how many man hours are actually available. The best paper shredders in the market are not necessarily easy and safe to use. They are intended to make you a hard target.

Shredders can primarily be classified into two categories - strip cut and cross cut. Strip cut paper shredders are a lot more economical and are easier to put together. However, they take up a lot more space. On the other hand, the cross cut paper shredders are the best there are although they are more expensive. They require constant maintenance but cross cut shredders are bound to meet any standards that may arise to preserve secrets by shredding paper.

Secondly, you should consider the capacity. This implies that you should estimate the number of sheets you would need to destroy daily. In addition, how many sheets at one time and how much capacity is available for trash should also be considered. These factors will help you to determine if you need a personal shredder or a commercial shredder. A personal shredder can manage anywhere between 100-150 pages per day with 5 pages at a time. These would require a trash bag that would be available in a standard trash can.

Certain other features should also be kept in mind. Some available shredders are meant to fit over standard trash bind while some others have built-in containers. The latter ones are more expensive but are certainly easier to empty and clean. The best paper shredders are those that are capable of destroying more than just paper - they should be able to shred CDs, DVDs, floppy disks, credit cards and staples as well.

If you identify that your needs of a shredder are limited to personal security and identity theft protection, you should go for a cheap and reliable shredder. On the other hand, if your use is concerning proprietary and business information, there are a variety of paper shredders to choose from.

The Fellowes DS-1 Fashion Shredder with Step Can is the best selling shredder on the market. This machine stops shredding when the paper feeder is touched. It is built in this manner to avoid fingers from getting damaged. It is capable of handling paper clips, staples and credit cards and paper up to eleven sheets at a time. This 36-pound cross cut shredder can only be shipped within the US. It reduces documents to 5/32" x 1-3/8" sized bits.

The Fellowes machine comes with a five-year warranty and a four and three quarter's gallon trash bin. The machine is priced at about $200 but used shredders can be found for substantially lesser costs. Sometimes new shredders can also be found for $100 in online stores.

The reviews for this particular model are excellent. This indicates that it is robust system capable of functioning properly. Our research suggests that this is probably the best paper shredder on the market for occasional home use.

The Fellowes Powershred PS-77Cs 12 sheet Confetti Cut Shredder is the highest reviewed shredder on Amazon. This 31-pound cross cut shredder has the SafeSense technology which means that it stops shredding if it senses your touch.

This is a more serious shredder than the DS-1, with a seven-gallon trash bin and the ability to shred credit cards, paper clips, staples as well as CDs and DVDs. The machine comes with a five-year warranty and can shred up to 12 sheets at any one time.

It reduces documents to 5/32" x 1 1/2" higher-security confetti. The shredder was initially designed to shred up to 600 pages a day.

This paper shredder has a clear window which indicates when the trash bin gets full. It is priced at $300 but can be found for as little as $100 on the Internet.

The only complaints lodged about this machine on Amazon.com are about the top heavy arrangement and as such, the customers would prefer to have wheels for portability and more structure for the trash bin. Overall, this is a well-loved and preferred paper shredder model among the numerous shredders available in the market. This will prove to be a wise investment if you have a home business or a small business office.

Nylon Shoulder Washer, 0.140" ID, 0.275" OD, 0.125" Thick, 0.400" Shoulder Diameter, 0.100" Length (Pack of 25)

Nylon Shoulder Washer, 0.140" ID, 0.275" OD, 0.125" Thick, 0.400" Shoulder Diameter, 0.100" Length (Pack of 25) Review

Nylon Shoulder Washer, 0.140" ID, 0.275" OD, 0.125" Thick, 0.400" Shoulder Diameter, 0.100" Length (Pack of 25) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Nylon Shoulder Washer, 0.140" ID, 0.275" OD, 0.125" Thick, 0.400" Shoulder Diameter, 0.100" Length (Pack of 25) Overview

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Apr 21, 2010 07:23:07

Is Silver-Nano Technology Safe For Washing Machine?

The Korea Science and Technology together with the Korea University has made a research that uncovered the effects of the nano-particles in killing bacteria and germs. However, their research showed that the nano-silver particles have microbe particles that are known to damage plants and animal cells that have been exposed to these particles.

Right after the research done, an alarm was raised to many washer companies and one of them was the Samsung Electronics which has been very active in their promotion of the Silver Nano Health System in washers and their air conditioners.

Gu Man-bok, professor in the bioscience department of Korea University stated that their evaluation of the effects of the silver nano-particles on different organisms as well as the environment is now on going. They further stated that the experiments the department has been doing on rice fishes have shown that the toxic on these organisms has been high in concentration.

Gu further stated that his laboratory has joined hand in hand with the Ministry of Environment to do a research about the silver nano-particles effect on different forms of life and this was considered as a delayed effort due to the fact that many consumers have already purchased washers with this technology and they have already been exposed to these kinds of products. Silver-nano cutlery, electronics, clothes, toys, baby bottles and the face masks are also now being sold in the market.

In lieu of these researches, the government of USA is planning to ban the selling of these products starting next year of evidence of safety is not provided. However, the government of South Korea stated that it was not in their plans to regulate such products.

According to Yoon Jun-won, a researcher of National Institute of Environmental Research said that it is too early to decide whether they are going to regulate certain products or not because as of this time, there aren't proven bad effects that are coming from these products.

For long, silver has been known to have the antiseptic effect and because of this, many Greeks in the olden days had used silver vessels for drinking water storage. Koreans have also chosen silver to make their chopsticks.

Because of this fact about silver, the modern technology has also maximized the used of silver as antibiotic. Through small particles with bigger surface areas, the particles can react with other materials more actively that is why many companies have taken advantage of the use of sliver particles that measure one nanometer.

In order to know the effects of the size of particles in sterilizing, Gu together with his colleagues has used a bacterium which was genetically modified to alter the damage that was incurred. Amazingly, it was out that super-oxide radical commonly described as deleterious molecules were produced by silver nano-particles and these radicals were not produced from normal silver ions.

LG Electronics as well as Samsung created washers with the silver-nano particles technology because of its power to kill bacteria. In fact, silver nano particles really kill bacteria, however; many scientists are still not certain of the safety it gives to humans. Hwang Ee-taek said that the research field is still in the elementary stage.

Another author who was also a part of the research said that many researchers are starting to become careful and aware of the results of the silver-nano particles to humans simply because of the worries that companies concerned may give them. Accordingly, this issue is such a sensitive one especially for big companies like Samsung.

An academic journal named Small published this research in March.

Domestic Sewing Machines

Sewing machine is a mechanical or electromechanical machine used to join fabrics using thread. It can create a wide variety of plain or patterned stitches. Sewing machines were introduced in the 1800s; it is one of the most important discoveries in the textile industry.

Of the different types of sewing machines, domestic sewing machines are the perfect tool for sewing. By the mid-nineteenth century, domestic sewing machines found a place in all U S homes to help women in the home production of clothing.

Introduced as a boon to the homemaker, domestic sewing machines are mainly used for domestic purposes and are manufactured to perform different tasks such as creation of buttonholes, stitching buttons on to the piece of clothing etc. Even though there are sewing machines that stitch using one, three, four or more threads, most of the domestic sewing machines use a two thread stitch called the lockstitch.

Also known as home use sewing machines, domestic sewing machines do not have feed dogs that pull the fabric to be sewn under the needle. As they don't have feed dogs, one has to pull the fabric with their hand. There are three basic types of domestic sewing machines-mechanical, electronic, and embroidery machines.

Lightweight sewing machine, straight stitch only sewing machine, embroidery only sewing machine, single-speed mini sewing machine, double-stitch double-speed home sewing machine and battery-operated handheld sewing machine are some of the domestic sewing machines available in the market.

Domestic Sewing Machine Company and Janome are some of the leading manufacturers of domestic sewing machines. Apart from providing sewing machines, they offer a wide range of accessories such as belts, bobbins, bobbin case, carrying case, fluids, guides, needles, organ, needle plates, presser feet, software, thread, and thread holders. Nowadays, it is possible to purchase domestic sewing machines through the Internet. EBay and Bizrate are some of the Internet dealers of domestic sewing machines.

While purchasing domestic sewing machines, be cautious to select the one that suits your needs and price range. Before purchasing domestic sewing machines, it is very important to determine the need for the machine, whether it is for mending or hemming, creating designer clothes, or for embroidery. Test the machine yourself once you have decided what sewing machine is best for you.

Cone Slip Joint Washer (38835B)

Cone Slip Joint Washer (38835B) Review

Cone Slip Joint Washer (38835B) Feature

• Fits 1/2" nut or 1/2" tube

Cone Slip Joint Washer (38835B) Overview

Sold as each. Fits 1/2" nut or 1/2" tube. 1/bag. Manufacturer's number: 38835B. Country of origin: Taiwan. Distributed by Danco Corp.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Apr 14, 2010 07:56:26

Nylon Shoulder Washer, 0.806" ID, 1.050" OD, 0.125" Thick, 2.065" Shoulder Diameter, 0.500" Length (Pack of 100)

Nylon Shoulder Washer, 0.806" ID, 1.050" OD, 0.125" Thick, 2.065" Shoulder Diameter, 0.500" Length (Pack of 100) Review

Nylon Shoulder Washer, 0.806" ID, 1.050" OD, 0.125" Thick, 2.065" Shoulder Diameter, 0.500" Length (Pack of 100) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Nylon Shoulder Washer, 0.806" ID, 1.050" OD, 0.125" Thick, 2.065" Shoulder Diameter, 0.500" Length (Pack of 100) Overview

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Apr 13, 2010 02:10:33

Carpet Cleaning Machines

There is a wide variety of carpet cleaning machines to choose from. The most commonly used is a vacuum cleaner. Most people prefer an 'upright' vacuum cleaner over a 'canister' for convenience. Some people also like to use a 'hand-held' for stairs and other carpeted areas that don't offer maneuverability.

An 'upright' vacuum cleaner can be used with one or two motors, depending on the type of dirt that accumulates and the type and frequency of cleaning required. Some people also like to use 'spotters' for spot cleaning. These usually have rotating brushes to scrub the stain off the carpet. In order to select the right carpet cleaning machine, we also need to be sensitive to the fabric that the carpet is made up of.

Another type of carpet cleaning machine is called the 'carpet cleaning extractor'. The extractor is ideal for deep cleaning. Use a regular 'carpet cleaning extractor' or a 'self-contained' one. A 'carpet cleaning extractor' is suitable for deep cleaning as it literally extracts dirt from an entire carpet, not just from its surface. If we use a 'self-contained carpet cleaning extractor', it injects a cleaning solution in the carpet and extracts it and it can also be used to vacuum the carpet after the process of extraction has been completed.

Many people also use 'carpet steam cleaners' for deep cleaning. The 'carpet steam cleaner' uses steam to draw dirt out of carpet surfaces, bases and fibers. It is considered extremely effective and several users of these machines say that it helps them get rid of all the dirt in their carpets, even if the dirt has seeped into the fibers and the base of the carpet. The steam injected by the 'carpet steam cleaner' loosens dirt and brings it closer to the surface. Then the dirt is vacuumed, leaving the carpet dirt free.

Some other factors that to consider before purchasing a carpet cleaning machine are size, attachments and accessories. The size of the machine should be in accordance with the preferences of the person who is going to use it the most. The choice of attachments, particularly cord length, should be determined based on the dimensions of the carpeted area. Accessories, such as different kinds of brushes, can be added for specific problems such as frequent food stains or dirt related to pets.

How to Use Your Pressure Washer

When learning how to use a power washer it is very important to first understand how the pressure washing and the equipments function. I am going to discuss some of the basic steps in the pressure washing process which is pretty standard no matter what machine or method you use. The steps and power washer suggestions are: know the minimum amount of pressure needed to do the job sufficiently, use I bio-degradable cleaner, especially if working in the grass, and also be aware that your pressure washer does get very hot.

When using a pressure washer be absolutely sure you read the manual. Running a pressure washer without water cycling through the engine and out the gun is devastating on your motor and will also burn the seals up in your pump. The pump is one of the most expensive parts on a pressure washer. Depending on the model sometimes it is less expensive just to buy a new one. Always, always keep water cycling through your pressure washing.

Pressure washing is an extremely effective way to do large amounts of work in an extremely short amount of time. When you get your pressure washer ready for use make sure you connect all hoses, and guns before starting your unit. Once all hoses are connected and you have water cycling through your engine and pump turn the switch to on and pull the cord. If the unit has not been started in awhile you may have to choke it. Another helpful tip is to always winterize your pressure washer. If your pressure washer doesn't start pull the spark plug out as it may need to be replaced if it is foul.

Once you are up and running you are ready to do some cleaning. I suggest starting far away from the surface that you are cleaning just to ensure you do not damage anything. Pressure washing can be extremely dangerous as well. If you are working with a machine the is too big for your pressure washing task you are liable to damage wood, siding, or even yourself. Do not use a your equipment while on a ladder for obvious reasons. Remember safety first.

Select the Right Pressure Washer For Auto Detailing

Auto detailing is the process of cleaning the exterior and interior of vehicles. Many types of cleaning machines are used for this process, including pressure washers, steam cleaners, and carpet cleaners. Pressure washers, the most powerful of the aforementioned machines, are ideal for removing virtually all residues from vehicle exteriors. However, there are distinct specifications for selecting the right system for auto detailing applications.

Need For Specially Designed Pressure Washers

A vehicle's contains exterior is comprised of a wide range of surfaces, including the metal body, hubcaps, wheels, windshield, windows, and engine components. The hardness and durability of these surfaces varies. For example, engine components are durable and sturdy. Windshields and glass are hard, but brittle. The metal body of a vehicle is hard as well, but the paint can be damaged if exceedingly high pressure levels are used.

Therefore, an ideal machine for auto detailing must be able to clean all types and varieties of surfaces without causing damage. Some of the latest models of pressure washers are suitable for this purpose. The following are some tips on selecting suitable pressure washers for cleaning automobiles.

Check Specifications

There are three main specifications for a pressure washing cleaners: output temperature, output pressure, and flow rate.

Output Temperature

Pressure washer cleaner can provide three ranges of temperature. Cold water output is water at room temperature. Hot water output refers to water at a temperature of 210°F. Steam output means water at a temperature of up to 330°F. For cleaning automobiles, a steam car wash is the best fit to increase the speed and efficiency of the cleaning process.

Output Pressure

The output pressure level of pressure washing ranges from 500 psi to 8000 psi, depending upon the model. Any pressure washer with an output pressure rating at or below 1500 psi is suitable for cleaning vehicles.

Higher pressure means increased cleaning efficiency. However, painted surfaces of automobiles can be damaged by pressure levels over 1500 psi. Therefore, one should find a balance between efficiency of the machine and safety of the automotive surfaces.

Flow Rate

Flow rate indicates the quantity of water that flows through the output of the machine per minute. It is expressed in gallons per minute (GPM). Flow rate normally ranges from 0.5 GPM to 8 GPM. For cleaning vehicles, a flow rate of 2 GPM or less is suitable. Mobile car wash machines with flow rates of 0.5 GPM are available from top suppliers to reduce water wastage. This is particularly beneficial for mobile auto detailers traveling to their customer's locations to clean automobiles where water or drainage may be limited.

Cleaning Solution

Most distributors recommend using a cleaning solution with pressure washers, regardless of the model, to provide additional cleaning power. Green chemicals are best, as they enhance the power of pressure washers in an environmentally-safe, non-toxic manner. Look for green car wash formulas, truck wash solutions, tire shines, windshield washes, and other formulas from the industry's top suppliers.

Renting Appliances

Depending on your needs you can rent appliances for short or long terms. Air conditioners, washers, driers, freezers, refrigerators, computers, DVDs, stereos and VCRs are the appliances and electronics that are most commonly rented. Appliances are available at various prices depending on the length of the rental term and the appliance being rented. The rates vary based on the period of renting, make of the appliance and the type. They can be paid for on a monthly or weekly basis.

There are many companies that rent appliances on various terms and conditions. Renta Centers are nationwide and one of the more popular appliance rental outlets. However if you check your local yellow pages or Internet, you?ll find many stores that specialize in appliance rentals. Most rental centers carry top brand names such as Sanyo, Whirlpool, Dell, HP, Philips and Mintek.

Apart from the local stores and companies, there are many online appliance-renting stores that provide a wide range of appliances on a short or long term basis. Zuma Leasing is a national online company that offers affordable and convenient ways to rent appliances online. There are other provides online including Clean Rents, EZ Washer and Dryer Leasing, Household Appliance Rentals, Apartment Appliance Leasing Service

Zuma Leasing is a national appliance leasing company that prides itself in giving consumers an affordable, and convenient way to rent appliances. Other providers available include: Clean Rents, EZ Washer and Dryer Leasing, Household Appliance Rentals, Apartment Appliance Leasing Service and others. Many of these sites will allow you to rent an appliance and then purchase it when the rental contract has expired. For some, this is a good way to test an appliance before actually making a commitment to purchase it.

Handling Bathtub Faucet Leak the Easy Way

The conditions seem tediously familiar. You have a bathtub faucet leak that drips slowly, but steadily. Apart from the severe drain on your resources, it's also draining you of your financial health. Being a layman, you don't boast of the competence to tackle this ostensibly Herculean task on your own. Handles, valves and 'O' rings seem too hot to handle, right? So you are left with no other option but to invite an expert to put an end to this drip-drip saga.

I'm sure this account has stirred up some not-so-wonderful memories in you. Well, just in case you belong to this bandwidth, you better get ready to invert that parochial thinking. Fixing that leaky faucet in the bathtub on your own is not as blatantly absurd as it sounds. With a few household tools and a boatload of patience, you can sail into seemingly uncharted waters without any hiccups.

Are you ready to be suffused by a gush of self-worth?

A Watershed Of Sorts?

That's exactly what this event is often referred to as, especially by homeowners without much plumbing experience. But here's what you need to do to sort out this recurring problem:

Before you get down to business, make sure you turn off the water supply. While in case of faucets in sinks, the valve lies under the fixture, in case of bathtubs, it is the main valve in the house that needs to be turned off.

Remove the faucet handle cautiously, by removing the screw that lies under the plastic or metal cap found on top of the handle. Make sure the screw is not misplaced.

The stem of the faucet is next in line. Use the correct wrench to undo this part, and that too with utmost care.

At the end of this stem lies the villain of the piece, the worn-out washer. Replace this part with a new one; make sure there's no discrepancy in the size.

If, to your utter dismay, you do not find a washer, what's the next course of action? Simple, replace the faulty stem.

The time of reckoning is finally here. Replace all the parts in reverse order, and wait for the sparkling results with anticipation.

Turn on the water supply, and you have an achievement that is second to none. Still believe in those age-old robotic roles?

American Standard Faucets

If you are in the market for faucets, try out the American standard faucets. They are the perfect choice for those interested in sleek and sophisticated pieces for their home.

Whether you want a replacement for your old style faucets or just buy an additional one, American standard faucets offer the perfect options. Before purchasing any one though, learn a few things about the types that are available. There can be the ball type, disc type, compression type and the cartridge type. With some knowledge of the make of these, you will be better able to judge the type that is best for you.

American standard faucets come in all types. The compression type is the basic one, which is found in most houses and is washer based. The other types are washer less as they do not use any rubber or neoprene washer. The ball type has a single handle and is used in kitchen sinks. This type has much more leaks than the other types though its advantage is the ease of use. The disc type has a single lever over the body. The big advantage of this latest type is that it rarely leaks.

Another type of faucet is the cartridge faucet, which works with up and down motion in order to control the flow and left and right in order to manage the temperature of water. The compression type is the oldest and rather uncomfortable to use.

American standard faucets offer every variety and with some information about each, it will be easier to select the right one. All faucets, including the most sleek and well-polished ones, are available in great styles. You can also repair your faucets with the help of a more detailed guide. Several websites detail the make and offer DIY solutions for any repair issues.

Clothes Washers Aka Washing Machine

How many times have you done the laundry and cried because you didn't have a clothes washer at home? A clothes washer can change your life. No more bruised hands and wrinkled fingers. Sure, clothes washers are expensive, but their many features are definitely well worth the long line of zeros on the price tag.

A clothes washer (also known as a washing machine or simply a washer) is a device used to wash and clean laundry, such as towels, clothing, and sheets. It uses a spinning motion to deep clean linens soaked in a mixture of water and cleaning detergent, as opposed to scrubbing the fabric like in hand washing. A clothes washer is actually safer to use on clothes. As long as you follow the correct water temperature and the right amount of detergent in the wash, the clothes will make it out of the washer just fine.

This machine can be either be a household or commercial appliance. Household clothes washers are smaller for space convenience and are less sturdy, but they still function well despite their cheaper price tags. In Europe and the Middle East , the front loading design is more popular, though the top loading design is much preferred throughout the rest of the world. Critics say the front loading design is the better of the two models. You might want to keep that in mind when buying a clothes washer.

Washing Machine Buying Tips:

* Look for an energy efficient or high-efficiency model (Electricity is NOT a renewable resource)

* Think about water usage (in general front loading clothes washers use less water then top loading)

* The number of different washing options isn't so much as important as the cycles that you will actually use so look for one that has the washing options that you are going to use the majority of the time

* Think about the amount of space that the washing machine is going to take up as front loading designs typically take up more space then top loading ones

* Compare manufacturer warranties as a washing machine is considered a major appliance and therefore preventing costly repair bills in the future can be prevented with a solid warranty

* The number of loads you or your family does in a week will help you determine how big of a clothes washer you need. A family of 6 with small kids is probably going to do a lot more then a family of 4 with grownups.

Most commercial clothes washers have sturdier and more compact models. These machines are usually fitted with a stainless steel body kit to protect it from corrosion and rust in a constantly moist environment, and many feature front loading designs. If you haven't seen a commercial clothes washer, you can find one at the nearest laundromat center in your area.

Nylon Shoulder Washer, 0.163" ID, 0.229" OD, 0.046" Thick, 0.312" Shoulder Diameter, 0.050" Length (Pack of 100)

Nylon Shoulder Washer, 0.163" ID, 0.229" OD, 0.046" Thick, 0.312" Shoulder Diameter, 0.050" Length (Pack of 100) Review

Nylon Shoulder Washer, 0.163" ID, 0.229" OD, 0.046" Thick, 0.312" Shoulder Diameter, 0.050" Length (Pack of 100) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Nylon Shoulder Washer, 0.163" ID, 0.229" OD, 0.046" Thick, 0.312" Shoulder Diameter, 0.050" Length (Pack of 100) Overview

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 30, 2010 10:55:15

Pressure Washer vs Power Washer

You have probably already learned that "power" is synonymous with "pressure" when searching for information about high-pressure cleaning equipment and services. What you may not know is that one of these terms is more commonly used than the other. This can be relevant to businesses for their online marketing campaigns and to consumers in their search for information.

On average, in the United States, the term "pressure washer" is approximately three times more likely to be searched for on the internet than "power washer". So, if your business is only using the term "power" on its website, blog, online store, and pay-per-click program, it is likely missing out on 75% of searchers and potential buyers. Companies wanting to reach the majority of these people with a minimum amount of work should market their cleaning equipment and services using the term "pressure". Ideally though, the optimal marketing campaign would target both terms to ensure the organization is reaching all consumers searching for pressure (or power) related cleaning services and supplies.

While this is true of the national average, companies should also research and consider the regional differences in how people search in each market. In several Southeastern states, for instance, people use the term "pressure washer" almost exclusively, with only about 1 in 10 searchers looking for a "power washer". Conversely, in some Midwestern and Northern states, the ratio of "pressure" to "power" is almost even, with roughly 6 of 10 searchers seeking "pressure washing" as opposed to 4 of 10 looking for "power washing". In places like Phoenix, Arizona where there is a melting pot of people from all over the nation, the ratios are more consistent with the national averages of one search for "power washers" to every 3 searches for "pressure washers".

Pentair Pacfab 2" HI-Flow Valve Washer 272402

Pentair Pacfab 2" HI-Flow Valve Washer 272402 Review

Pentair Pacfab 2" HI-Flow Valve Washer 272402 Feature

• WASHER PLASTIC
• Pentair PacFab 2" HI-Flow Valve

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 27, 2010 06:28:19

Beneath the Bonnet

Haven't looked underneath the bonnet of your car for quite some time? Just like our own need for water, a car needs oil, various fluids and regular maintenance. Read our beneath the bonnet guide, grab the following items from your local motor factors and get working!

What you'll need to do:

1) Oil Check

2) Engine oil check

3) Engine Coolant check

4) Power Steering Fluid check

5) Brake Fluid check

6) Window Washer Fluid check

1) Oil Check; In order to check the engine oil you are going to have to use the dipstick. The dipstick is normally located to the front of the engine on all cars. It is used to check the level of engine oil. Always make sure to park your car on level ground when doing this. How you check the level of oil, is by removing the dipstick. You should then wipe the metal end of it with some tissue. Place the dipstick back into its holder, and pull it back out again. Observe the end of the dipstick. There should be a line indicating the level that oil should be at. If it is below the line obviously, you have to top up oil, and should do so immediately. If it is above the line, you can resume driving and will not need to top-up.

2) Engine oil is a fantastic substance. It keeps your car's engine running smoothly, oiling the interior components and ensuring that it does not seize. Believe it or not, a UCPG survey has shown that one in three cars on Irish roads is low on oil. You should make sure to check the level of oil in your car every month. After you have checked it (see oil check), you might need to top it up. How you do this is by removing the engine-oil cap. We would recommend that each time you top up the oil, try and use the same brand name and make every time. Add a little oil into the engine and then wait one minute for it to settle inside. Re-check your dipstick, and add accordingly if it is not at the correct level, and requires more. When the level is correct, screw the cap back on and make sure you have slotted the dipstick back in place. You should not have to replace oil frequently. If you do, the engine could be leaking.

3) Radiator coolant is a mixture of water and coolant that is pumped around the engine and cools it with the help of the radiator. To check the coolant level you will have to find the reservoir where the water/coolant mixture is stored and dropped in. When you find the reservoir, next you will have to see if it is at the correct level. On the outside of the reservoir there will be wither a line or two lines indicating what level the coolant should be at. If there is only one line, the level should be at the line. If there are two lines the level of liquid coolant mixture should be between the lines. If it is even slightly below the lines we suggest you top it up straight away. You will obviously have to purchase some coolant first. You will have to mix it with water, at a ratio of 50% water, 50% coolant. Remove the reservoir cap and add the mix accordingly.

4) Power steering fluid Before checking your power steering fluid, you should run the car first for a few minutes to warm up the engine. Make sure as always that it is parked on level ground to gain an accurate reading. Turn the engine off. Again open up your bonnet and find where the power steering fluid reservoir is located. Remove the reservoir cap, which will usually have a small dipstick attached to it. Using the dipstick check the level of fluid. The level should be within the range indicated on your stick. Top up the fluid using whatever type is recommended in your cars owner's manual.

5) Brake Fluid; In similar fashion to the radiator coolant reservoir, there is a brake fluid reservoir and it has a marker to show how much fluid should be in the braking system. To check the brake fluid level, refer to this marker and top up accordingly. On the reservoir cap, a marking will read out either DOT 3 or DOT 4. What is written on the cap is the type of brake fluid you will have to use. When buying the fluid, ask for the DOT that your car requires. Again, top up the fluid accordingly. Check around the brake disc area of the wheels for signs of leaking fluid after putting the fluid in.

6) Window washer fluid is something that we all should have changed at least once in our motoring lives. Window washer fluid, as suggested by its name is used to wash the windscreen and is a mixture of mainly water and washer fluid. The windscreen washer bottle should prove the easiest part to locate beneath the bonnet. It generally will have a marking similar to that in the picture.

Note: Location of the above discussed applications will differ with different car manufacturers and models. The above engine picture should help you to locate them.

The Right Kind of Pressure Washer

There's something fun about using a pressure washer. Its like having a high powered squirt gun except you use it to clean things with. Save money by washing your own car,boat, even your home but make sure you get the right tool for the job.

Pressure washers are rated in psi. or pounds per square inch and the biggest problem for people who go out and buy them is they don't get one with enough power. You can go to the department store and buy a 1000 to 1700 psi washer for around a hundred bucks and you won't have enough working pressure to wash your car with, which is what most people buy them for. By the same token you can get one that is so powerful that it will take the paint right off whatever it is you're cleaning, and most of the cheaper ones are not adjustable, so be sure you either get one at the pressure you need or find one that lets you dial in the pressure to suit the job. A minimum of 2800 psi is needed for washing most cars.

You can get a pressure washer in almost any configuration you want. There are gasoline driven pressure washers and electric motor driven ones. The more expensive ones even have oil or propane fired heaters that let you wash with hot water which is ideal for making an engine look brand new, and the top of the line ones can even put out steam.

Besides washing your car and saving money on all those coin operated car washes, you can blast off that dirty driveway, clean the outside of your house, make short work of clearing out your gutters, and cleaning patio furniture and around swimming pools is a breeze with a pressure washer. You can even start your own business by getting a pressure washer and mounting it on a utility trailer along with a generator and water tank.

Nylon Shoulder Washer, 0.156" ID, 0.250" OD, 0.062" Thick, 0.315" Shoulder Diameter, 0.187" Length (Pack of 50)

Nylon Shoulder Washer, 0.156" ID, 0.250" OD, 0.062" Thick, 0.315" Shoulder Diameter, 0.187" Length (Pack of 50) Review

Nylon Shoulder Washer, 0.156" ID, 0.250" OD, 0.062" Thick, 0.315" Shoulder Diameter, 0.187" Length (Pack of 50) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Nylon Shoulder Washer, 0.156" ID, 0.250" OD, 0.062" Thick, 0.315" Shoulder Diameter, 0.187" Length (Pack of 50) Overview

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 21, 2010 09:15:58

Oregon 37-051 Pressure Washer Quick Connect Coupling 3,650 PSI Max 7.8 GPM 300-Degree F Max 3/8-Inch Female Inlet & 22mm x 1.5 Female Outlet

Oregon 37-051 Pressure Washer Quick Connect Coupling 3,650 PSI Max 7.8 GPM 300-Degree F Max 3/8-Inch Female Inlet & 22mm x 1.5 Female Outlet Review

Oregon 37-051 Pressure Washer Quick Connect Coupling 3,650 PSI Max 7.8 GPM 300-Degree F Max 3/8-Inch Female Inlet & 22mm x 1.5 Female Outlet Feature

• 3650 Max PSI
• 7.8 GPM
• 300 Degree F Max Temp
• 3/8-Inch Female Inlet, 22mm X 1.5 Female outlet

Oregon 37-051 Pressure Washer Quick Connect Coupling 3,650 PSI Max 7.8 GPM 300-Degree F Max 3/8-Inch Female Inlet & 22mm x 1.5 Female Outlet Overview

Quick Coupling

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 18, 2010 23:07:08

Nylon Shoulder Washer, 0.253" ID, 0.371" OD, 0.031" Thick, 0.750" Shoulder Diameter, 0.046" Length (Pack of 50)

Nylon Shoulder Washer, 0.253" ID, 0.371" OD, 0.031" Thick, 0.750" Shoulder Diameter, 0.046" Length (Pack of 50) Review

Nylon Shoulder Washer, 0.253" ID, 0.371" OD, 0.031" Thick, 0.750" Shoulder Diameter, 0.046" Length (Pack of 50) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Nylon Shoulder Washer, 0.253" ID, 0.371" OD, 0.031" Thick, 0.750" Shoulder Diameter, 0.046" Length (Pack of 50) Overview

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 17, 2010 14:14:23

Nylon Shoulder Washer, 0.375" ID, 0.500" OD, 0.125" Thick, 1.000" Shoulder Diameter, 0.750" Length (Pack of 100)

Nylon Shoulder Washer, 0.375" ID, 0.500" OD, 0.125" Thick, 1.000" Shoulder Diameter, 0.750" Length (Pack of 100) Review

Nylon Shoulder Washer, 0.375" ID, 0.500" OD, 0.125" Thick, 1.000" Shoulder Diameter, 0.750" Length (Pack of 100) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Nylon Shoulder Washer, 0.375" ID, 0.500" OD, 0.125" Thick, 1.000" Shoulder Diameter, 0.750" Length (Pack of 100) Overview

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 16, 2010 07:44:04

Fix A Leaking Outside Water Faucet

Sometimes you run across a leaking spicket that is on the outside of the house. If you live in the city, this could increase your water bill not by much but still an increase. If you live out in the country this might increase the electric bill because the well keeps on running to provide that water.

Depending on the type of spicket that you have will depend on the fix. If you have a standard compression spicket, which usually has the round metal handle on it, the leak may be coming from the handle stem, if so all you have to do it tighten the packing nut that is buy the handle. To do this just take a wrench and tight the packing nut around the stem. Now if that doesn't fix it, and the handle is still leaking, or that the leak is coming from the spot, we are going to have to take the take the spicket apart.

To do this we want to start off by shutting off the water to the spicket. This is done usually in the basement or crawl space. Now if your house is on a concrete slab there is one of two things you can do. One is shut the water main off to the entire house, or if you are lucky and the plumbers installed a shut off for that spicket, which they most likely didn't do, you can turn that off. The same goes if you don't have a shut off in the basement for the spicket, you have to shut off the main to the house. Now the main to the house will have a large meter on it known as, you got it the water meter. There will be some sort of valve near it. Warning! DON'T SHUT THE VALVE OFF THAT GOES INTO THE METER. This will get you into a lot of trouble it tampered with. The valve that we want is on the out of the water meter.

With the water shut off, its time to get to work. Now go outside and turn and open the valve to release and water that is in the pipes from the inside valve to the spicket. If you had to shut the main off go every fixture in the house and open them to release the water and the go to the spicket and open it. This will remove any water from the house and then you don't have to work with water coming at you by surprise.

Now, if the stem is leaking we are going to want to remove that part from the spicket. To do that, we are going to need an adjustable wrench. Behind that packing nut there is a spot that you can place an adjustable wrench and unscrew the assembly. Completely unscrew that packing assembly and remove it from the spicket. Now we are going to want to get to the packing nut washer. To do this we need to unscrew the handle on the assembly. There should be a nut or screw on top of the handle that you can unscrew. Unscrew it and remove the handle.

Next you are going to want to unscrew and remove the packing nut. Inside the nut you are going to find some type of washer, either a Rubber packing washer or graphite packing string. Remove either and replace with a new matching one. Now if you can't find a matching washer for the packing nut, you can use graphite sting. Wrap the string around the stem and the push the packing washer over it and tighten it down. You can do this by using a flat blade screw driver. The reverse the steps, first by reinstalling the packing nut, put the handle on the assembly, put the assembly back in to the spicket, and tighten.

Now if the spicket was leaking from the spout, all beginning steps are the same to get the assembly out of the spicket. Then you are going to want to replace the compression washer that is on the bottom of the assembly. Unscrew the nut that holds it in place and replace the washer with it exact match size and shape. Re-screw the screw back on to the assembly to hold the washer. Then reinstall the assembly back into the spicket. With the spicket reinstalled it is safe to turn the water back on. Make sure that all the faucets in the house that you opened are closed first.

Malber WD1000 Front Load All-in-One Washer Review

The Model Malber WD1000 washing machine possesses the combination of dryer and washer. If you are looking to save space in your laundry room, this washing machine will be the ideal choice.

Malber WD1000 cost about $1,050 US dollars today. As an energy efficient washing machine, you will notice that your electric bill is kept to the minimum. One good thing about this washing machine is its compact design. It is 20 7/8 inches deep 33 ½ inches tall and 23 ½ inches wide in measures, ideal for small household.

This machine operates on a standard of 110-volt power. In this washing machine you do not have to take out your clothes as it has a dryer function as well. With just a simple press of the button, you can dry and wash your clothes without the hassle of transferring to another washer. This washing machine also features eight other separate rinse and wash cycles.

This particular washing machine also features the ventless drying system. It condenses cold water through the machine when it runs steaming. Water wastage is minimized. You do not need to place the machine near the window for ventilation purposes also.

This machine featured two separated drying cycles. One is for the normal clothes and the other one is for delicate clothes. The time range of this dryer is from ninety (90) to one hundred twenty (120) minutes timer. Therefore, compared to a gas unit dryer, it'll take a long time to dry your fabrics.

If you're planning to buy a combined dryer and washing machine with quality, you must take a closer look at this Malber WD1000. It uses a standard 110-volt power and there's no need to have any special wiring.

Liebherr Upright Freezer Review

The upright freezers from Liebherr are all energy- saving appliances and allow all the frozen food to be easily accommodated and make food storage convenient. The interiors of the freezers are variable and they feature easy-to-open doors. The energy you save by using one of these freezers as opposed to an older freezer will save a lot of money in the long run, which makes keeping stocks of fresh fruit, vegetables, meat and fish convenient and economical.

There are eight models to choose from in the current selection of Liebherr upright freezers and all but two of them have NoFrost technology. The NoFrost technology makes the Liebherr upright freezer range even more economic and keeps the freezer from icing up. It works by circulating dry air around the freezer cabinet using fans. Instead of the traditional cooling elements assembled within all the freezer liner, those of a NoFrost system are compact and separated from the main cabinet space, which means that they are able to be heated for short periods of time to stop any ice from forming. The two upright freezers that do not have NoFrost technology included are the G2413 Comfort and the 2713 Comfort models.

The Liebherr upright freezers are energy saving as they come with an energy efficiency rating of either A+ or A++. They are available in a selection of sizes and the height of the freezers ranges from 125cm to 184.1cm. Each of the upright models has the same width of 60cm apart from one model. The GNP 3376 Premium NoFrost model has a width of 66cm so make sure if you go for this model that you have made enough space available for it. The maximum capacity of the Liebherr upright freezers ranges from 151 litres to 305 litres, so there should be a model available for both single households, large family households and everything in between.

Liebherr's selection of domestic appliances in general is noted for its concept, modern design and well-planned solutions for optimum convenience to the consumer. Its domestic appliance range includes table-top, free-standing and combined refrigerators and freezers, freezer chests, food storage and drink- cooling refrigerators, wine cooling and wine-temperature control cabinets. But as well as domestic appliances, Liebherr also manufacture refrigerators and freezers for commercial use.

The Liebherr family business was established in 1949 by Hans Liebherr. Originally, the company did not focus on domestic kitchen appliances, but was more involved in the manufacturing of tower cranes and industrial machinery. But over the years the family business has grown into what is today a group of companies, who employ a workforce of around 26,000 in more than 100 companies all over the world. The Liebherr Group's holding company is Liebherr-International AG in Bulle, Switzerland and it is entirely owned by members of the Liebherr family. Over 45% of the Liebherr Group's workforce is based in Germany.

Domestic appliances from Liebherr are a symbol of quality in Europe and beyond. Every day more than 7,000 appliances leave Liebherr's various production plants. All Liebherr have a 2 years parts and labour warranty.

The Crazy Future of the Washing Machine

The washing machine. It's a pretty regular thing. White. Square. Not usually the type of object that anyone could get excited about. Until now, that is. It just so happens that the last few years have seen some crazy advances in the industry, and the future looks even more interesting. So what's up in the world of the washer?

LG Washer and Ironing Machine.

In 2006, Korean electrical giants LG announced the arrival of a washing machine that can iron as well as wash. By incorporating a unique hot steam system that starts after the rinse cycle, the creases that develop during washing are quickly eradicated, not only saving you time on ironing, but also meaning that your clothes will never shrink again. The machine is also available with a floral pattern to further stand out from the washer crowd.

Eco Egg

The Eco Egg, developed by the Chinese company Jiangmen Hanyu Electrical, is a curious thing. As the name suggests, this mini-washer is egg-shaped, pink and looks edible. The manufacturers are proud of its environmentally-friendly and its disinfecting function making it safer for cleaning baby clothes. It also means that instead of having to wait for a full load, one or two shirts can be washed whilst still being eco-friendly.

Whirlpool Mobile Phone Washing Machine

Another in a long line of 'smart' goods, Whirlpool have developed a washer that can be controlled by SMS. By using a home network, the machine alerts you if it has stopped by either sending a message to your mobile, TV or computer. The user can then either attend to the situation manually, or if he/she is not at home, they can send an order back to the machine, for instance a 'fluff' or dry cycle.

The Sfera - Spherical Washing Machine

In a revolutionary turn of washer design, the team at Electrolux have invented a completely new mini-washer. The Sfera is a wall mounted ball that entirely revolves. The few graphic representations that have been released show the machine attached to two walls in the corner of a bathroom of the future. But it remains to be seen that when the design comes to fruition, whether it will be able to carry the weight of wet clothes or will be able to be mounted on any kind of wall without breaking it when in use.

The Washup Washer/Toilet

The Washup is another future design. In simple terms it is a washing machine and toilet in one. The machine sits atop the cistern and once it has finished washing, uses the water from your dirty clothes to flush the toilet. The design is also space-saving and easier to use without any crouching or bending down involved.

Xeros

Finally, the University of Leeds has been testing a machine to be released in 2009. Amazingly, the full-size machine uses just a cupful of water in addition to plastic chips that absorb any dirt and are collected at the end of the cycle. Clothes are nearly dry as soon as the cycle is finished.

Nylon Retaining Washers 6, 21/64" OD x .198" ID x .062" Thick (Pack of 100)

Nylon Retaining Washers 6, 21/64" OD x .198" ID x .062" Thick (Pack of 100) Review

Nylon Retaining Washers 6, 21/64" OD x .198" ID x .062" Thick (Pack of 100) Overview

Similar to standard flat washers, but with a specially configured I.D. designed to grip the outside of the screw shank. The washer slides on the screw easily, but is retained on the screw. For use in applications requiring pre-assembly of the screw and washer, to reduce final assembly cost.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 07, 2010 18:42:09

Nylon Shoulder Washer, 0.144" ID, 0.234" OD, 0.046" Thick, 0.312" Shoulder Diameter, 0.062" Length (Pack of 50)

Nylon Shoulder Washer, 0.144" ID, 0.234" OD, 0.046" Thick, 0.312" Shoulder Diameter, 0.062" Length (Pack of 50) Review

Nylon Shoulder Washer, 0.144" ID, 0.234" OD, 0.046" Thick, 0.312" Shoulder Diameter, 0.062" Length (Pack of 50) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Nylon Shoulder Washer, 0.144" ID, 0.234" OD, 0.046" Thick, 0.312" Shoulder Diameter, 0.062" Length (Pack of 50) Overview

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 06, 2010 04:48:12

Nylon Shoulder Washer, 0.205" ID, 0.312" OD, 0.046" Thick, 0.620" Shoulder Diameter, 0.046" Length (Pack of 100)

Nylon Shoulder Washer, 0.205" ID, 0.312" OD, 0.046" Thick, 0.620" Shoulder Diameter, 0.046" Length (Pack of 100) Review

Nylon Shoulder Washer, 0.205" ID, 0.312" OD, 0.046" Thick, 0.620" Shoulder Diameter, 0.046" Length (Pack of 100) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Nylon Shoulder Washer, 0.205" ID, 0.312" OD, 0.046" Thick, 0.620" Shoulder Diameter, 0.046" Length (Pack of 100) Overview

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 03, 2010 00:19:04

10 Bolt Size, Stainless Steel Lock Washers (100 Per Package)

10 Bolt Size, Stainless Steel Lock Washers (100 Per Package) Review

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 01, 2010 17:53:13

General Pump Pressure Washer Quick Couple Spray Nozzle - 3.0 Size, 0 Degree Spray

General Pump Pressure Washer Quick Couple Spray Nozzle - 3.0 Size, 0 Degree Spray Review

General Pump Pressure Washer Quick Couple Spray Nozzle - 3.0 Size, 0 Degree Spray Overview

Hardened stainless steel nozzles fit directly on our pressure washers. Material: Hardened stainless steel, Size (in.): 3.0, Degree of Angle ( deg ): 0, Includes (qty.): 1

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Feb 28, 2010 12:55:06

Science Fair Project Ideas rewarded Win - Project # 11 - Magnets

Target

Make an electromagnet with coils of wire. The purpose of these experiments Science fair is to test the strength of the electromagnet can. You can also determine how the intensity of the magnetic field is influenced by the number of the wire wrapped around him, while the magnet.

Introduction

A magnetic field is produced when a flow of current through a wire. The same can be demonstrated in scientific experiments with a singlemagnetic compass. Since a single cable has a relatively low magnetic field, the wire can be wrapped, please note that the increase included the strength of the magnetic field with each coil.

Discover how the intensity of the magnetic field changes when the coil is increased. You will also need the coil) directly (parallel or perpendicular, to be effective.

Hardware

A 6V battery, alligator clips, magnetic wire, tape, paper clips (oneBox) or 200 shots of steel (1 cm diameter) and three long pieces of material, such as iron nails and iron bolts or pieces of iron pipe.

Preparation

Three different electromagnets must be made with material of equal length. Now, wrap the wire around each unique magnetic part of the base material, but to be the number of images for each piece differently. For example, a piece with 100 laps, the second with 200 laps and will be wrappedthird place with 500 laps. Hold the wire wrapped at both ends to connect the tape together and leave at least 5 to 6 cm of additional wire must be connected to the battery. With the knife carefully the isolation of the free end of the magnet wire and exposing 1 cm of copper wire.

The free end should alligator clips, which are still used in scientific experiments, Fair to be connected. The alligator clip should be connected to the battery. Use a tray to hold lowStaples (slices).

Procedure

Start with the base material with 100 turns of the coil.

Connect the alligator clips to the battery and hold the coil of the electromagnet parallel to the plate to touch the paper clips (washers) to collect the coil. Move the roll-out of the tank and remove the battery. Now count how many paper clips were attached to the coil, and note the number of a table. Repeat the same procedure 4Times and calculate the mean of 5 readings and write it in the table.
Well, to keep the angles of the electromagnetic coil to touch the paper clips (discs) with the coil. Move the roll-out of the tank and remove the battery. Now count how many paper clips were attached to the coil, and note the number of the table. Repeat 4 times and the mean of 5 readings and write it in the table.
Then you take the role200 rounds and repeat steps 1 and 2
Then go to the coil with 500 turns, and repeat steps 1 and 2

Be sure to include your conclusions without guilt. The table consists of a series of numbers. The graphics are very important for the science fair experiments. Then you draw a diagram showing the results for each orientation. The X axis is the number of revolutions to reflect and the y-axis, how many paper clips (washers) are reflected in the attached electromagnet.

WhenA glance at the table, you will be surprised that in May all your efforts of curved lines, which were given to speak louder than numbers.

Nylon Shoulder Washer, 0.193" ID, 0.246" OD, 0.045" Thick, 0.625" Shoulder Diameter, 0.175" Length (Pack of 50)

Nylon Shoulder Washer, 0.193" ID, 0.246" OD, 0.045" Thick, 0.625" Shoulder Diameter, 0.175" Length (Pack of 50) Review

Nylon Shoulder Washer, 0.193" ID, 0.246" OD, 0.045" Thick, 0.625" Shoulder Diameter, 0.175" Length (Pack of 50) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Nylon Shoulder Washer, 0.193" ID, 0.246" OD, 0.045" Thick, 0.625" Shoulder Diameter, 0.175" Length (Pack of 50) Overview

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Feb 26, 2010 03:02:09

Build Your Own Laundry and Dry Dig For Desert Gold

Cleaning is a piece of cloth that is used to separate gold from sand, with pulses of air through a porous media material. This allows the gold to settle down and caught. E 'gold prospecting equipment of choice in the arid desert. Vibrations and the flow of air to replace the function of normal water in the lock, so that the gold settle down. Screened gravel is a box of pistol cross with oblique grooves. The bottom of the window consists ofa network of thin lightweight fabric or other materials through the air flows upward.

There is no doubt that the dried slices a kind of gold prospecting equipment, enough to have if you are in the desert of the work, but the prices are very high. In addition, at least for the type of bellows Laundry dry, not so hard to do. It has evolved over the past 40 years could be made before buy-slices dry slightly. For a hundred years agousually the driest slices homemade affairs were designed and constructed gold wash themselves. If you are part of this great tradition of explorers, read on.

First, much of what home-made dry enough slices of wood, wood and tools of the internal standard for all but the shelf rifle. I have plans for a general type of pump average chemical cleaning house, and you can click on my site (see below). You can accept and use thesePlans, or use as a starting point and develop your own washing machine dry. To build, you should think about how to build special units, which design and ideas that you want the washer and dry, clean house to use. There are also commercial units on the market, and may be useful to look at, if you make your design.

The design concept must first you think is the source of the air. Wants to build a bellows pump, or the type of fan motor units.Both work well, but the kind of pump is obviously easier to build. For this reason, I suggest, a kind of purification buffer, if this building is the first time when you. Remember, dry washers made so that you can always change in the future, to a kind of buffer to a kind of fan, if that's what you decide, finally, really want to move.
N. Mater your design, you need the following materials: wood, metal, cloth, screws, canvas. I suggest 3 / 8 inchesWeaving material for the big screen - half an inch would probably be OK, but I suggest 3 / 8 inches better. Too big and rocks greatest help to make your golden hair, and is too small, and you can lose a nugget of Nice, if you dig.

You need standard tools of labor. See my web page, how to get the tools you need. I have a page about hand tools for this type of project that you see on my website.
My best recommendation if you beginManufacture of equipment (for mine clearance and retain what they are in good condition) is to buy a small welder. In fact, I recommend that if you are one of those welders that I want to buy a full web page on him. If you take on the construction of chemical cleaning itself seriously, look at my website.

A scrubber is mainly made up of two connected boxes, and the top and bottom. The box above is actually just a gravel hopper can feed. Materiallarge for the screen is the screen as a freestanding "Oversize". The exact size of the upper windows are not so critical, but do not want too big or too small. The lower zone contains the bellows or a fan and put on the weapon.
We paddle on the screen until the box is filled up, then with a pump type, a step in a path in the area and pull the rope to make the breathing bellows. The material can then be his way through the funnel and through the lock grooves. WhenThe funnel is empty, you start digging until they are full.
Make sure you buy the screen for the top window is robust and is supported on the funnel, also from below. If you throw too many big rocks on the screen of a poorly supported is easily bend and break. This is something that can be corrected, but if you are on the ground, can be very annoying. A quarter of the stems in a few centimeters in diameter, steel can be very useful in supporting the screen.

Capture GoldGrooves in the bottom of a hair washing are not different from those of a valve the water. Based on a closed water is the gold that is kept behind the weapons. A dryer, gold will take place on the upstream side of the weapon. The Riffle a tray of the things that are truly in force, must be set by welding. I suspect that the bolts would be a small possibility, but the welding is far superior. Drawer Welding not wear that much work. OnUnderside of the mat and a lightweight fabric chiffon fabric that can go through it the air upward. The thresholds should be a tray movable in a regular (usually every two hours duration), rifles and concentrates can be removed and placed in a bucket for subsequent processing. It will be kind of pump that sucked the dust into the lower box, the air and cleaned from time to time. Check out the soldering of the above for further information.

On the floorthe lower zone, where the air comes in. If you are a fan, that the use, where the bay. If you have an MDI / folding dish drying, for there is the bellows. Have a nice tight weave make makes it a good blow. Rubberized waterproof material that has been or is better. You also need an outlet, so that "air to enter and exit only through the grooves. One way return valve is usually a simple piece of 1 / 8 inch rubber floor covering a hole about 4 inches in diameter. The bellows arebased on the one side and a hinge of the opposite side of the hinge is connected. Pull the cable through the hot air gun painting. Photos on my website for more details. Be useful to the legs on the lower blocks support in any way adjustable, as the surface is in the fields of gold is often very irregular.

Stainless Steel Bartite Sealing Washer, #10, 0.205" ID, 9/16" OD, 0.065" Thick (Pack of 100)

Stainless Steel Bartite Sealing Washer, #10, 0.205" ID, 9/16" OD, 0.065" Thick (Pack of 100) Review

Stainless Steel Bartite Sealing Washer, #10, 0.205" ID, 9/16" OD, 0.065" Thick (Pack of 100) Feature

• Sealing Washers have a sealant adhered to the underside of the washer
• Stainless Steel is suitable where formability and cost are important considerations
• Withstands 12,000 lbs psi hydrostatic pressure
• Low-profile design was developed to seal when space is limited
• Size Name corresponds to matching screw or bolt size

Stainless Steel Bartite Sealing Washer, #10, 0.205" ID, 9/16" OD, 0.065" Thick (Pack of 100) Overview

Sealing Washers are one-piece washers with sealant adhered to the underside, making them ready for immediate, time-saving assembly. Now an industrial standard, these economical washers have been supplying sealing solutions in aerospace, construction, defense, lighting, and marine applications for decades.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Feb 23, 2010 18:22:50

M24 - Bolt Size, 25mm (A), 60mm (B), 8mm (C), Steel, Heavy Duty Stamped Flat Washer, Reid Select (1 Each)

M24 - Bolt Size, 25mm (A), 60mm (B), 8mm (C), Steel, Heavy Duty Stamped Flat Washer, Reid Select (1 Each) Review

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Feb 22, 2010 05:27:43

Commercial glass washer - worth its weight in gold!

In the case of commercial catering equipment, some of the first things that we are spontaneous large commercial ovens, toaster and coffee that are large enough to meet the needs of the lively cafes, restaurants and nightclubs to fulfill. While these devices is for the functioning of these institutions is of crucial importance is often something that can be difficult to detect.

Disks antennas and commercial matters glass are an integral and important part of modernImprove efficiency and ensure that all dishes and glasses of sparkling wine and left to dry quickly enough to be used repeatedly during the day or night. In most cases, when the washer and flat glass to be good that the company operates or is washed by the loss of an employee handbook to hand, the dishes, or a total disaster, running with a company in bowls or cups for serving customers .

Commercial dishwashers are much larger than theirtheir national counterparts and are suitable for heavy commercial use in restaurants, cafes and bars, where a large number of glasses and plates, others should be cleaned in a short time to design. Commercial dishwasher as other commercial establishments catering must be efficient and dishwasher safe and easy.

The advantages of commercial dishwashers are numerous and include high capacity and rapid cycling and the ability to dry glasses and plates quickly, so thatQuick turnaround. Unlike domestic dishwasher, is the commercial version for constant use, hour after hour, day after day develops. In addition to this, as the cars antenna and commercial glass washing their full cleaning much faster than the internal version, so that anyone with a cafe or restaurant, no matter they are used to provide a constant supply of food to clean and dry.

It is hard to imagine how the catering industry, such as coffee, cafes, bars and restaurantsAddresses before the introduction of today's business world, fast and very energy efficient, utensils and glasses. In addition to the cleaning fluid to wash and rinse aid in the modern supply of crockery and glasses and dried in a short time only adds to the need for commercial glass and dishwashers in each food business employees.

5/8 - Bolt Size, 21/32 (A), 1 3/8 (B), 3/16 (C), Stainless Steel, Heavy Duty Machined Flat Washer, Reid Select (1 Each)

5/8 - Bolt Size, 21/32 (A), 1 3/8 (B), 3/16 (C), Stainless Steel, Heavy Duty Machined Flat Washer, Reid Select (1 Each) Review

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Feb 19, 2010 14:57:10

2004-05 Yamaha FZ1 Frame Sliders Install Instructions

This frame slider kit has been developed to unprecedented protection you can offer your
2004-5 Yamaha FZ1000 in the unfortunate event of a tractor or overturning.
Motovation Frame Sliders are designed and manufactured by a company that
makes Sliders. Each model is tested for the protection of falls and slides.
Are hard but not brittle and can also absorb a large impact. Sport Riders
have been tested around the world, the various models of our products on the runwayhave
All gave their thumbs up after experiencing first hand the benefits of Motovation
Sliders.

Please read all instructions before starting work! These controls are designed under
special engine mounts to suit your 2004-5 Yamaha FZ1. E 'strongly recommended
Consult your service manual before installation.

Instructions:

1. Remove the left engine mounting bolt, as the picture on the left side. 2. Position the cursorwith the new screw and washer with a washer under
Screw head. 3. Tighten the screws securing the motor against planned mother - not too tight 4th Remove right side engine mounting bolts. (same location as the other side). 5. Position the cursor with the other new bolts, nuts and washers (included in kit)
with a washer under the screw head. 6. Tighten the screws securing the engine to factory specifications - DO NOT
Dress up.

Included in FZ1000 2005Motovation frame slider kit: (2) 10 x 140 mm 1.5 screws (2) stainless steel lock nuts (2) Aluminum bushings (pressed into plastic) (2) Plastic Frame Sliders (Left-over), washers (4) Soup

How to Plumb a new bathroom

Before measuring the jump in the desired position, it is better to accommodate the overflow, faucets and traps. The reason for this is that once the bathroom is fitted with a wall, it is difficult to make connections from the body in a narrow space. Put a little "adjustable feet on the bottom of the pan so that it can increase the edge of the pan to the desired height. Make sure you also check to its height from the length and width of the tank.

Mounting Taps

If you separateFittings for hot and cold, then would this only as you would for a washbasin. If you have a blender, so you have been granted with a gasket a long time. This seal slides over the two tails in lowering the tail through the holes in the rim. Place on top has washers and tighten the two nuts back to the mixer safe securely to the bathtub. When you order a copper tube 22 millimeters flexible and adaptable in each queue.

These tubesallow easy adjustment may be required if the joints are slightly wrong. Alternatively, add short sections of standard 22 mm (3 / 4 ") copper or plastic pipe with tap connectors in preparation for joining the title tune.

The disposal of waste and overflow

It is better to use a combination of waste and overflow unit to your bathroom. If you use a plastic hose, take the water from the overflow, so the trash. A tube with aCompression unit connects to the case, but if you're a banjo must adapt to overflow before the trap.

Now fit, spread a layer of silicone sealant under the edge of the deposit of waste or a round rubber gasket. Before inserting the tail through the hole in the floor or bathroom, sealing the thread with PTFE tape. The soil, add a plastic washer, then tighten the large back-nut, bedding the outlet to the seal or rubber gasket. Wipe the excessSealant.

Close take the case to bath in the back of waste with a separate nut.

Pass the threaded boss on the pipe to flow through the hole at the bottom of the tank. Drag a seal on the head, then with pliers the overflow gate output screw.

If you use a compression fitting overflow, close the tool and the other end of the hose to the eye of the trap is clean.

Nylon Shoulder Washer, 0.150" ID, 0.190" OD, 0.025" Thick, 0.230" Shoulder Diameter, 0.100" Length (Pack of 100)

Nylon Shoulder Washer, 0.150" ID, 0.190" OD, 0.025" Thick, 0.230" Shoulder Diameter, 0.100" Length (Pack of 100) Review

Nylon Shoulder Washer, 0.150" ID, 0.190" OD, 0.025" Thick, 0.230" Shoulder Diameter, 0.100" Length (Pack of 100) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Nylon Shoulder Washer, 0.150" ID, 0.190" OD, 0.025" Thick, 0.230" Shoulder Diameter, 0.100" Length (Pack of 100) Overview

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Feb 15, 2010 14:48:04

More Washer-dryers - the perfect combination

A combination of a washing machine and dryer, that some consumers. This type of machine is very useful where loads of laundry is not as easy as possible, especially if there is little space in the room rate down. With this type of washing machine, washing machine is also effective because it combines the functions of washing and drying. For this type of washing machine, every time the water comes from: it is left out or collected by or with the help of tubes.

There areObserved number of things, if you want to buy a washer dryer.

Wash load capacity
What we must always keep in mind is the ability and the size of a washing machine. Depending on where you place the washing machine. Another important aspect is the number of people in the house, because it determines the amount of laundry loads. Typically between 3.5 to 5 liters, is the ability, or sometimes more. Although it isalways better, need a larger capacity than you, but as you pointed out that if you dry clothes, so you need more space than necessary.

Speed range
The amount of cleaning action is held by the speed of the spinner. To ensure effective cleaning, the speed is required. Range 800rpm to 1600rpm, the speed of the washing machine. In addition, it makes sense, washing machines and variable speed so that you can change the speedSpinners for delicates.

Performance Evaluation
The shares of the washing performance is given about their performance. That begins with A, from A to GA to be more effective in cleaning While most washing machines these days come with a warning of C, the capacity of water that is used in a washing machine is also an important factor that must be taken be paid to act. Water tank capacity is calculated in liters and is marked usually in the fields of the washing machine.

EnergyConsumption
You should also consider the use of energy for the washing machine. The washing machine is more powerful, used when more watts. Although this increases the consumption of electricity, but the car would be more efficient.

You also need to know the time to wash the clothes of certain skills. Depending on the amount of dirt in your wash time can vary from 30 minutes to 2 hours. Noise level of the washing machine is expressed in decibels. Normally, if theWashing machine is quieter, is more expensive.

Useful functions
In addition, there are many other functions of the washing machine which will demonstrate to the machine useful. To wash a body were in child-resistant, half load button, start timer delay, their hands in the currency (for clothes that are sensitive), Anti-Leak Detector (detects the car wash for losses) and the option to keep trick. All of these functions has to be very useful and makes work easier. You can alsoAlways use in the future.

Camping at California State Beaches

California State Parks offer a total of 64 plants Beach State up and down the beautiful coast of California. Many beaches offer camping facilities, and California all offer breathtaking views of the coastline and a wide range of activities that are sure to please every member of your family.

Sonoma Coast State Beach is in the coastal region of California. Sonoma Coast Visitors can enjoy hiking, biking and horseback riding on the scenic trails andsteep beaches. While the waves and strong currents back to the beaches of northern California are not safe for swimmers, which offer great opportunities for surfing. Wildlife, including seals and the endangered snowy plover can be found throughout the park and fishing is plentiful along the 17 kilometers long beach.

Sonoma Coast has developed two campgrounds and two family camps for the environment. Bodega Dunes features 98 campsites and hot showers. A beach of sand with aBoardwalk is accessible for people with disabilities is located in the vicinity of the camp and summer programs for children. Wright's Beach offers 27 campsites on the beach with picnic tables, fireplaces, and paved parking. Wright's Beach campers can use the showers in the dunes of Bodega.

In the Bay Area of San Francisco, California, Half Moon Bay State Beach campers can experience the moderate temperatures and beautiful beaches of the bay from San Francisco through hiking, fishing, orPicnic. The four miles of wide sandy beaches of Half Moon Bay includes four beaches, three miles to follow route for walking, jogging and cycling and then. Francis Beach has a camping site for 52 tents and campers, as well as chip hot showers. The water in the bay of San Francisco is too cold for swimming all year round, but fishing in the park is abundant.

Central Coast of California offers a variety of beaches of the state, which offers many activities and places.From hang gliding to bird watching, the central coast has a bit "of everything. El Capitan State Beach is located just outside Santa Barbara and has a shaded picnic and camping site near the El Capitan Creek. Hiking, mountain biking, surfing and Fishing in the park to be enjoyed. A bike path connects the park near Refugio State Beach, just 2.5 kilometers. Refugio Visitors can also drive from camping, hiking, mountain biking and fishing.

County of Los Angeles has several beachesRooms with a picnic and hiking trails. While most of these beaches in the state is not suitable for camping trips. Malibu Lagoon visitors can visit the historical and cultural exhibitions, as well as bird watching and nature tours, including the representation of the gray whale. Santa Monica State Beach is a beach, wonderful shops and activities such as volleyball, basketball and jogging offers. Many beaches in Los Angeles County also offer Wi-FiServices. During the visit, goes to a cooler as a cooler wheels Coleman, keeps food fresh and cool your drinks.

Orange and San Diego counties are some of the best California beaches for swimming and surfing. The mild temperatures of the beaches of the Mediterranean are the main destinations throughout the year. San Clemente State Beach is a beautiful sandy beach that stretches one miles of coastal Orange County. The campground has 157 sites in San Clemente, 72including joints. Visitors can enjoy hiking trails, and the natural and cultural exhibitions and events. The beach is important for picnics, swimming and windsurfing, and the park has a Wi-Fi available.

Schonbek 5711-22 Heirloom Gold Romanoff Crystal Three Light Down Lighting Wall Washer from the Romanoff Collection

Schonbek 5711-22 Heirloom Gold Romanoff Crystal Three Light Down Lighting Wall Washer from the Romanoff Collection Review

Schonbek 5711-22 Heirloom Gold Romanoff Crystal Three Light Down Lighting Wall Washer from the Romanoff Collection Overview

Three Light Wall Washer from the Romanoff CollectionThe Czarist court inspired this intriguing sconce.Three light down lighting wall washerFeaturing Heritage Handcut crystalsRequires 3 40w Candelabra base bulbs (not included)

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Feb 12, 2010 00:03:10

Oregon 37-057 Pressure Washer Spray Gun with 14-Inch Lance Medium Duty 3,200 Max PSI 8 GPM 104-Degree F Max 3/8-Inch Female Inlet & 22mm x 14mm Female Outlet

Oregon 37-057 Pressure Washer Spray Gun with 14-Inch Lance Medium Duty 3,200 Max PSI 8 GPM 104-Degree F Max 3/8-Inch Female Inlet & 22mm x 14mm Female Outlet Review

Oregon 37-057 Pressure Washer Spray Gun with 14-Inch Lance Medium Duty 3,200 Max PSI 8 GPM 104-Degree F Max 3/8-Inch Female Inlet & 22mm x 14mm Female Outlet Feature

• 14-Inch ext length
• 3200 PSI max
• 140 degree max
• 3/8-Inch female thread inlet

Oregon 37-057 Pressure Washer Spray Gun with 14-Inch Lance Medium Duty 3,200 Max PSI 8 GPM 104-Degree F Max 3/8-Inch Female Inlet & 22mm x 14mm Female Outlet Overview

Spray Gun with Lance Extension - Mid Duty

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Feb 10, 2010 17:21:13

Nylon Shoulder Washer, 0.285" ID, 0.375" OD, 0.125" Thick, 0.500" Shoulder Diameter, 0.125" Length (Pack of 100)

Nylon Shoulder Washer, 0.285" ID, 0.375" OD, 0.125" Thick, 0.500" Shoulder Diameter, 0.125" Length (Pack of 100) Review

Nylon Shoulder Washer, 0.285" ID, 0.375" OD, 0.125" Thick, 0.500" Shoulder Diameter, 0.125" Length (Pack of 100) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Nylon Shoulder Washer, 0.285" ID, 0.375" OD, 0.125" Thick, 0.500" Shoulder Diameter, 0.125" Length (Pack of 100) Overview

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Feb 09, 2010 09:44:08

Finishing Washers, Nickel

Finishing Washers, Nickel Review

Finishing Washers, Nickel Overview

#6 100 Pieces.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Feb 06, 2010 06:50:02

Nylon Shoulder Washer, 0.253" ID, 0.312" OD, 0.062" Thick, 0.375" Shoulder Diameter, 0.031" Length (Pack of 100)

Nylon Shoulder Washer, 0.253" ID, 0.312" OD, 0.062" Thick, 0.375" Shoulder Diameter, 0.031" Length (Pack of 100) Review

Nylon Shoulder Washer, 0.253" ID, 0.312" OD, 0.062" Thick, 0.375" Shoulder Diameter, 0.031" Length (Pack of 100) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Nylon Shoulder Washer, 0.253" ID, 0.312" OD, 0.062" Thick, 0.375" Shoulder Diameter, 0.031" Length (Pack of 100) Overview

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Feb 05, 2010 01:21:16