This frame slider kit has been developed to unprecedented protection you can offer your
2004-5 Yamaha FZ1000 in the unfortunate event of a tractor or overturning.
Motovation Frame Sliders are designed and manufactured by a company that
makes Sliders. Each model is tested for the protection of falls and slides.
Are hard but not brittle and can also absorb a large impact. Sport Riders
have been tested around the world, the various models of our products on the runwayhave
All gave their thumbs up after experiencing first hand the benefits of Motovation
Sliders.
Please read all instructions before starting work! These controls are designed under
special engine mounts to suit your 2004-5 Yamaha FZ1. E 'strongly recommended
Consult your service manual before installation.
Instructions:
1. Remove the left engine mounting bolt, as the picture on the left side. 2. Position the cursorwith the new screw and washer with a washer under
Screw head. 3. Tighten the screws securing the motor against planned mother - not too tight 4th Remove right side engine mounting bolts. (same location as the other side). 5. Position the cursor with the other new bolts, nuts and washers (included in kit)
with a washer under the screw head. 6. Tighten the screws securing the engine to factory specifications - DO NOT
Dress up.
Included in FZ1000 2005Motovation frame slider kit: (2) 10 x 140 mm 1.5 screws (2) stainless steel lock nuts (2) Aluminum bushings (pressed into plastic) (2) Plastic Frame Sliders (Left-over), washers (4) Soup
ไม่มีความคิดเห็น:
แสดงความคิดเห็น